How to Paint Kitchen Cabinets

Are your kitchen cabinets beginning to look a little obsolete?

When it comes to old cupboards you only actually have 2 options, you can either tear them all out as well as invest the money to replace them, which can be pricey as well as time consuming.

Or you can just make the effort to repaint them– It’s a basic project as well as usually affordable.

Today we’ll break down how to paint kitchen cabinets in 8 steps, beginning with preparation, after that paint, as well as wrapping up with reassembly.


Note: If you are planning on paint laminate cupboards you will certainly also wish to make certain that their are no nicks or dings on the cabinets ahead of prepping and also sanding them.

, if the closets are currently painted you will additionally want to take the time to strip them prior to paint so you have a good clean finish to start with..

It is essential to remove the cabinets in a well aerated location to avoid the build up of toxic fumes. With that said being said, let’s cover the required steps you will certainly require to take.

Action 1 Vacant Cabinets then Get Rid Of Closet Doors and Drawers

Once you prepare you can begin emptying all your cabinets of any kind of things left in them. When all items have been removed you can begin removing all the equipment, consisting of joints, knobs, deals with and any type of remaining screws.

To help with reassembly it is suggested that you put these parts in specific plastic bags and classify them, after that leave them in the cabinet sections they originated from.

When all the equipment has been removed you then remove the drawers and likewise apply labels to these components, this guarantees each component of your cupboards go back in their original location.

Step 2 Tidy as well as Wipe Down the Cabinets

Now that your cabinets are dismantled you should put in the time to clean them down with water and trisodium phosphate (TSP) cleaner.

Taking this step guarantees you get rid of any leftover crud, oil or dirt that’s stuck on gradually, this is especially vital as these are kitchen cabinets.

You will want to wear rubber gloves for this step to shield your hands and also ensure all cupboards are cleaned down fully upon being cleaned with your TSP solution.

Step 3 Fill up and Fix any type of Openings or Dents

After you are done cleaning your cupboards you will want to give them an once over and also keep in mind any type of dents or imperfections. Make the effort to fill these with a timber filler of your option– this will need making use of a versatile putty blade.

When all fixings are done make sure to give the filler enough time to dry.

If you are not replacing your equipment you should be fine with your existing closet openings however if you are going to be updating your cupboard equipment you will certainly intend to either fill in your openings or adjust them to accommodate your brand-new fittings.

Tip 4 Protect Your Location

Since we await the major job, it is necessary to prep your location and safeguard your job surface area. I normally set a drop cloth on the counter leading after that do with painters tape, taping off any kind of boundary areas and places touching the closets.

When painting, you will certainly also desire to move any type of things that can get in your way.

Step 5 Sand and Clean the Cabinets

With your area shielded you can begin sanding your closets making use of a medium/fine grit sandpaper.

The important part to concentrate on in this action is guaranteeing you are fining sand with the grain of the wood and also getting through the first layer of the finish that still stays on the closets, in addition to obtaining the edges and also corners.

You must follow the exact same process for both the cabinets and doors.

Laminate closets are likewise paintable, you just have to guarantee that you give them an appropriate sanding, and don’t allow the edges to splinter.

When you are done prepping as well as sanding your cupboards you will certainly intend to provide a fast vacuum and wipe down with a dry fabric to eliminate any type of remaining dust.

Step 6 Use a Coat of Guide

You will certainly desire to start with a brush that is coated yet not over soaked. Utilize the brush to reduce in the edges under the counter tops, around outlets, as well as molding and also than utilize the foam roller for the bigger areas, such as frameworks and cabinet fronts.

It is important to keep in mind that when you are repainting with a roller you will certainly want to paint in a W activity and also always end in a damp location. While your guide layer does not need to be ideal, you do want to set a reasonably thick and even layer, this will guarantee your paint really shines.

The very first step to repainting your cupboard doors as well as cabinet fronts is to get them slightly off your work surface, this will assist you maintain the cupboard cleaner as well as enter into all the small fractures, enabling you to obtain a truly great layer of guide on all sides.

Do not forget to allow each side of the cabinet or cupboard dry prior to repainting the opposite side and also repeat the procedure. It needs to be kept in mind if you are painting drawers, you should think about not repainting the sides, as the paint can commonly wear away from these locations with time.

As constantly, make certain to check out the supplier’s instructions on drying time to ensure your offering your guide the suitable time to resolve.

To ensure you have an ultra smooth surface, you may also intend to do a light fining sand between your guide and full paint work.

Step 7 Intro image for closet paint article

Currently it’s time for the actual fun, repainting the cabinets! We suggest using an acrylic latex-based paint due to the fact that it’s simple and also long lasting to clean.

In terms of paint finish, you will certainly wish to prevent a high gloss or flat finish as these can be tough to tidy as well as scuff quickly. It is recommended you choose either a semi-gloss or satin surface yet only you can actually decide what you like.

Equally as with the guide, make use of the brush for cutting in and also paint your frames and your paint roller for repainting the larger locations and also in a similar way for the cabinet and also door fronts.

Make certain you attempt to leave as little tool marks as feasible during this area. Allow the paint dry and cure according to the manufacturer’s directions. As long as you offer your cupboards the proper time to dry you can rest assured recognizing they will come out with an excellent difficult finish.

Once your finish coat is dry and also the paint has set you can put on an optional coat of urethane. If you select to do this step, utilize a water-based urethane over the acrylic paint. This can add some additional resilience to your cabinet coating and also allow your paint job to last much longer.

Tip 8

Rebuild the Cabinets and Equipment
With your cupboards prepared for reassembly you can begin replacing the equipment. During this area make sure you utilize a hand-operated screwdriver to ensure that you don’t go across string any of the screws or harm the coating of the closets.

If you select to make use of all new equipment currently is the time to damage that out, if you are utilizing your old equipment, take it out of your labeled bags as well as screw right into it’s matching area.

Including a new rack lining can also be a nice touch– this adds to the total finish and again includes in the long term durability of the cabinet surface.

If the closets are already repainted you will certainly likewise want to take the time to remove them prior to painting so you have a good clean coating to begin with.

After you are done cleansing your closets you will certainly desire to provide them an as soon as over and keep in mind any kind of dents or imperfections. Do not fail to remember to let each side of the drawer or closet dry prior to repainting the various other side and also repeat the process.

Now it’s time for the actual enjoyable, repainting the cupboards! As long as you give your cupboards the suitable time to dry you can rest assured recognizing they will certainly come out with an excellent tough finish.


How To Use a Paint Sprayer, Airless, HVLP, And Compressed Air

Often it just makes sense to utilize a paint sprayer in contrast to utilizing conventional techniques such as a brush or roller. Allow’s go over just how to make use of a paint sprayer thoroughly, both airless and also HVLP sprayers. However first, some questions.

To begin, we need to figure out simply what we plan to repaint, after that, what sort of sprayer is one of the most ideal, what sort of paint are we using, and what is the most effective method for application.


Use Paint Sprayers

At this point, you most likely have a task in mind that you feel would certainly be much better tackled utilizing the spray painting method.

There are several scenarios you may use a sprayer for example around the house you may be.

How To Use a Paint Sprayer

Paint inside rooms, outside siding, fencings, landscape wood, or roof coverings. Other tasks may include outside as well as indoor restroom, furnishings and also kitchen transformations, cars and trucks, bikes, boats, or the products you offer.

All of these will have a different strategy and also certain sprayers. So prior to we go into how to utilize a paint sprayer we need to determine which kind is best for your job.

Sorts Of Paint Sprayer

There are 3 usual kinds of paint sprayers Compressed air sprayers, Airless paint sprayers, and HVLP paint sprayers.

Compressed Air Sprayers–.
These are the conventional approach of spray paint. They contain an air compressor that feeds pressurized air with to the paint spray gun. Pressed air sprayers are frequently used for paint autos, bikes, as well as furnishings, or anywhere where the paint surface is to be of excellent quality.

While pressed air sprayers are extremely efficient at applying paint, they are best used in regulated settings such as in a spray painting cubicle. There is a lot of paint originating from the spray gun in a fine however focused haze. Using such equipment outdoors can result in a lot of paint not going onto the job because of gusty problems.

Air compressor painting is primarily limited to using solvent-based paints and discolorations as they need to be thinned down. This procedure allows an extremely great paint spray so therefore the excellent finish they can produce.

It’s not recommended to make use of latex, water-based paint with a compressed air sprayer as the paint is to thick. You would need to slim the latex paint so much that to obtain good protection would take numerous coats of paint.

Airless Paint Sprayers.

The very best Airless paint sprayers rely on an electric pump and also piston to produce stress as well as to send out the paint with a tube to the spray gun suggestion.

The paint is atomized with the pressure and also allows the paint spray to be correctly guided with the spray gun suggestion.

Airless sprayers have 2 pipes. One hose goes straight into the canister of paint. From here the paint is drawn with the sprayer to the major spray pipe.

The major hose is generally between twenty-five and also fifty feet long, relying on the equipment brand name. The spray gun routes the paint fan to the work.

Just how to Use A Paint Sprayer -Airless.

Airless sprayers can pump out a great deal of paint. They additionally are excellent for making use of latex water-based paints.

This type of paint is very quick compared to the traditional brush as well as roller and is where these machines shine.

You will, however, make use of even more paint with an airless sprayer than you would certainly with a paint roller.

Airless paint sprayers aren’t simply constrained to slapping on massive quantities of paint at a quick rate.

They are additionally excellent for painting timber or comparable indoor surface areas to a mirror-like coating.

Using different spray pointers its very easy to paint with spots, lacquers, and varnishes. These surfaces do call for some practice to get it right yet completion results can be incredible. Especially on closets as well as furnishings.

HVLP Paint Sprayer– What Does HVLP Mean.

HVLP represents High Quantity Reduced Stress. These spray-guns can dispensing a lot of paint at reduced stress and still preserving a great coating.

The reduced pressure from an HVLP paint sprayer makes certain that much less paint is wasted.

Standard high-pressure compressor driven sprayers pump a great deal of paint to surrounding areas due to the high pressure. This triggers even more waste than a low-pressure HVLP system.

Types Of HVLP Paint Sprayers.

There are 2 types of HVLP paint sprayers. The first is matched to make use of with the traditional compressor system called a conversion system.

This essentially transforms your high-pressure compressor to a more regulated HVLP system. This provides you more control and less paint overspray than a conventional compressor established.

The other kind of HVLP sprayers is portable as well as small devices that are called dedicated systems. These are great for do it yourself, fanatics.

Among the better-known designs is the Wagner series of HVLP sprayers.

Often it just makes feeling to use a paint sprayer as opposed to making use of traditional approaches such as a brush or roller. Let’s go over exactly how to make use of a paint sprayer in detail, both airless and HVLP sprayers. Compressed air sprayers are typically made use of for painting autos, motorbikes, and furniture, or anywhere where the paint coating is to be of high top quality.

While compressed air sprayers are very reliable at applying paint, they are best used in regulated settings such as in a spray painting cubicle. From below the paint is drawn through the sprayer to the major spray hose.

Read more:



Enable substantial time for the paint to completely dry prior to eliminating tape from your trim. This will certainly cause crisp, tidy lines.
Eliminate all treatments from plants, hedges and also shrubs. Thoroughly eliminate all tape and also plastic covering from doors and window trim.

Change any kind of equipment such as lighting fixture, residence numbers or shutters that you eliminated.

Tidy your airless paint sprayer after each usage. If relevant, comply with the instructions in your individual’s guidebook for Power Flush cleansing with water based products or make use of the pail technique of cleansing.

For additional information, see Power Flush Video clip or describe your Sprayer Procedure Guidebook.
Return any other things (furnishings, grill, and so on) to their correct location.

Security Notification: Whenever running spray tools, take appropriate safety and security preventative measures, remain sharp, and also be conscious of prospective dangers.

Put on safety equipment such as handwear covers, safety and security glasses/goggles, spray sock (hood), hat, correct shoes, dirt masks and also respirators. Constantly refer to the particular directions as well as security treatments for the spray tools you are utilizing.

Prior to you repaint the outside of a residence, it’s finest to begin by relocating all exterior furnishings or any type of various other products such as a grill away from the location to be splashed.

Select the spray suggestion that’s finest matched for the paint you are making use of and also the surface area to be splashed. The instructions you will certainly spray depends on the building and construction– as a basic regulation, spray any kind of subjected trusses, timber light beams, or boards by intending the spray follower pattern to adhere to lengthwise.

Splash the external sides initially, “banding” the location that you will certainly spray. For within edges, intend the spray idea straight right into the edge so that the spray follower overlaps both sides.

61CEv7+blAL._AC_SL1500_ (1)



Graco, Magnum, or TrueCoat Paint Sprayer (go to Paint Sprayer classification web page to contrast versions).
Spray ideas– a broader spray pattern for big surface areas as well as slim dimension for smaller sized surface areas (see pointer selector).
Vacant pails for priming sprayer as well as cleaning (2 required).
Mix sticks.
Repaint filter bag– assists avoid pointer plugs and also supplies a far better surface.
Tarps, ground cloth, or plastic bed linen.
Covering up tape.
Repaint brush for touch-ups.
Magnum idea expansion (optional)– for hard-to-reach locations that would certainly or else call for a ladder.
Stress roller package (optional).
If required, extra airless pipe areas.
Spray guard.
Pump Shield storage space liquid (see pump protectant item information).
Cleaning up dustcloths.
Tight nylon brushes for clean-up.
Security as well as defense devices– safety and security glasses/goggles, dirt mask/respirator, spray sock or hat to cover head.


Prior to you repaint the outside of a home, it’s ideal to begin by relocating all exterior furnishings or any other products such as a grill far from the location to be splashed.

Enable lots of room for your devices as well as devices. Tape off any kind of trim, and also cover any kind of surface areas you do not desire splashed such as home windows or hedges with plastic.

Utilize a stress washing machine as well as cleansing option to clean the whole outside surface area, consisting of any type of soffits or eaves, that are to be repainted.

Enable surface area considerable time to completely dry.
Get rid of any kind of mold and mildew, mold, or dust, as well as remove any type of peeling off paint.

Fix any kind of broken exterior siding, soffits or trim. Drive any kind of loosened nails purge. Sand any type of harsh surface areas and also caulk spaces as required.


Select the spray idea that’s finest matched for the paint you are utilizing and also the surface area to be splashed. Make certain the suggestion’s opening dimension does not go beyond the optimum ability of your sprayer (see spray idea details).

Blend it with each other in a vacant 5-gallon container to make certain constant shade also if tiny shade distinctions exist in between specific paint canisters if you’re utilizing paint from several containers.

Pick a level surface area such as the side of the home or various other location that will not conveniently be seen to start on if you do not have a whole lot of splashing experience. Beginning on top of the location and also function your method down, initial splashing any kind of eaves or bottoms of any type of overhangs.

The instructions you will certainly spray depends upon the building and construction– as a basic guideline, spray any type of subjected trusses, timber beam of lights, or boards by intending the spray follower pattern to adhere to lengthwise.

Valuable Suggestion: When repainting the eaves of your home, a suggestion expansion is a valuable device as it will certainly enable you to securely spray hard-to-reach locations or various other overhangs from your ladder.
Splash the external sides initially, “banding” the location that you will certainly spray.

For within edges, intend the spray pointer straight right into the edge so that the spray follower overlaps both sides.

After you have actually finished the eaves, spray the outside wall surfaces themselves. Cut in around doors and also home windows initially, and after that spray the continuing to be level locations, overlapping each go by 50%.
See Just How to Make Use Of a Paint Sprayer: Spray Techniques for even more splashing guidelines.


Update the appearance of your home with a fresh layer of paint. Graco sprayers are easy to use as well as you’ll complete in a portion of the moment it requires to repaint with a conventional roller or brush.



Among the quickest methods to paint a space is making use of an airless paint sprayer With a Graco sprayer, you can transform the look of any kind of space in your home in a portion of the time it would take you to repaint it by hand with a roller or brush.

Safety Notice: Whenever operating spray devices, take correct safety and security preventative measures, remain alert, and also be mindful of prospective threats. Use protective gear such as handwear covers, safety and security glasses/goggles, spray sock (hood), hat, proper footwear, dirt masks as well as respirators. See to it there suffices air flow. Turn them off if you’re painting in the location of devices. (See Safety And Security Preventative Measures in your Sprayer Operation Handbook.) Always refer to the particular instructions as well as safety procedures for the spray devices you are using.

Man painting a wall with a sprayer.




Graco, Magnum, or TrueCoat Paint Sprayer (see Paint Sprayer category page to contrast models).
Spray suggestions– a slim 6- or 8-inch spray follower typically works best.
Vacant containers for priming sprayer as well as cleanup (2 needed).
Mix sticks.
Repaint filter bag– aids prevent suggestion plugs as well as gives a much better finish.
Tarps, drop cloths, or plastic sheet.
Covering up tape.
Paint brush for touch-ups.
Magnum pointer expansion (optional)– for hard-to-reach locations that would otherwise need a ladder.
Pressure roller set (optional).
If required, added airless hose pipe areas.
Spray guard.
Pump Shield storage liquid (see pump protectant item information).
Cleaning cloths.
Rigid nylon brushes for cleaning.


Move as much of the furniture out of the area as possible. Move any type of remaining furnishings to the facility of the area and also cover it totally. Permit lots of area for your devices and also tools.
Cover everything you do not wish to obtain paint on. Apply covering up tape and safety paper around as well as over doors, home windows and also trim.
Turn off the power to the space and also remove cover plates from electrical fixtures, outlets as well as buttons. Remove heating and a/c air vent covers. Apply concealing tape over the staying buttons as well as electrical outlet receptacles.
Usage spackling substance and also a putty blade to complete all nail and also screw holes. As soon as completely dry, sand any type of harsh locations.


Suggestion: If you’re working in a little area or prefer to not spray, utilize a Graco Pressure Roller Package for great results and also time savings.

Select the spray tip that’s ideal suited for the paint you are utilizing and also the surface area to be splashed. Make certain the tip’s hole size does not go beyond the maximum capacity of your sprayer (see spray idea information). If you’re utilizing paint from numerous containers, blend it with each other in a vacant 5-gallon container to make sure constant color even if tiny color differences exist in between individual paint containers.
Start on top of the room and function your way down. Work in areas, just as far as you can easily get to. Spray the external sides first, “banding” the location that you will certainly spray as well as cutting in any type of corners. For within corners, aim the spray suggestion straight right into the edge so it overlaps both sides.
Cut in around doors and windows first, and then spray the remaining flat areas using overlapping strokes. Make repeated spray passes down the walls, aiming the spray idea at the edge of the previous pass and also overlapping by roughly 50%.


Permit substantial time for the paint to dry prior to removing tape from your trim. This will result in crisp, tidy lines.
Eliminate all coverings from furniture and also other areas.
Change any kind of lights fixtures that you eliminated and relocate furniture or various other products back right into area.
Tidy your airless paint sprayer after each use. Adhere to the instructions in your individual’s manual for Power Flush cleaning with water based materials or use the container approach of cleaning if applicable. To learn more, see Power Flush Video clip or describe your Sprayer Procedure Manual.
Move furnishings or various other things back right into area.

If you’re painting in the area of home appliances, turn them off. Select the spray pointer that’s best fit for the paint you are using as well as the surface to be sprayed. If you’re making use of paint from several containers, blend it together in an empty 5-gallon container to ensure regular color also if little color distinctions exist in between specific paint canisters.
Splash the outer sides first, “banding” the area that you will spray as well as cutting in any kind of edges. Clean your airless paint sprayer after each use.

How to Choose the Right Airless Paint Sprayer

Many errors can be made in the choice of a sprayer, so we count on a group of qualified specialists and train painters and decorators in our own training center how best to pick the right Airless sprayer

In recommending on the choice of a paint sprayer, the customer’s requirements and field of application are talked about in detail in order to assemble a pre-selection of the most appropriate paint spraying equipment.

When buying an airless paint sprayer, Suggestions.
In the course of the consultation, therefore, the following questions are talked about in information:

Which material should be processed? Lacquers, glazes, guide, dispersion, silicate paint, tissue adhesive or filler?
Which projects should be managed with the sprayer? Lacquer work, homes, single or multi-family homes or industrial jobs?
What are your requirements for the sprayer? Quality, frequency of lifespan, budget plan and use expectations play a role here.
Producer independent Airless sprayer suggestions & the little information
In the course of the assessment, the choice of the paint spraying devices is restricted and the advantages and downsides of the various designs are clarified.

In addition, possible equipment variations are gone over, which can considerably improve the work result and simplify the implementation.


Here some examples:

  • Has the ideal nozzle been picked?
  • Are the matching filters included?
  • Does the pipe have the best length for the job and the right diameter for the product being sprayed?
  • Is a spray lance required to spray high ceilings?
  • Consumption system– rigid suction, suction pipe or funnel?
  • Drive: power, battery, fuel engine or compressed air?

An important point for us, the recommendations is vendor-independent, because we have all manufacturers in the program.

This makes sure that you can choose the optimum sprayer for your jobs.

If there are any issues or concerns after your purchase, even more crucial– contact us
Normally whatever is great, however what if not? In this case, we are your direct contact.

How to Choose the Right Airless Paint Sprayer1

Service warranty cases we clarify!

Our skilled group of professionals guarantees a fast service in case of damage (nationwide).

Beyond that there is a need for advice after buying a sprayer.

Whenever new projects are pending, we support our consumers in the optimal choice of nozzles, filters and the ideal accessories.

Choice of extra parts for the repair of airless sprayers
We also happily assist you in the choice of extra parts.

For this function, we supply building and construction drawings of the makers Wagner and Graco on our site.

The blew up illustrations offer you the chance to get a quick overview of the structure and extra parts of your sprayer.

In addition to the illustrations, you will likewise discover a fast summary of the most important extra parts, where you can order spare parts straight.
Nationwide repair and upkeep service for paint spraying equipment
If a sprayer is faulty or does not pump any longer, we will gladly take care of the repair.

Nationwide, we will get the faulty paint sprayer from you.

Our experienced technicians examine the paint spraying equipment and we determine the expense of the repair work for them (specialist time and extra parts needed).

If the order is positioned, our professionals have at their disposal our big spare parts storage facility and generally begin directly with the repair work of the paint spraying devices– so no time at all is lost for the procurement of extra parts.

Training & Test Center Spray Innovation– Airless Discounter Academy
As a supplement to the therapy we provide, our Training Academy is likewise available (Courses currently just offered in German at the Berlin place).

Here we offer useful day seminars for ideal use and handling of Airless paint spraying technology.

In practice, the topics of optimum spray pattern and premium surfaces, with lowered overspray, reduction or removal of any malfunctions and cleaning and care of spray equipment are taught in small groups.
Total training, test sprayers, speak with on-site & then buy
For some of our consumers the subject of Airless spray technology is brand-new to them and they want more information before buying an Airless device.
Understandably, similar to one test drives an automobile ebfore buying, we provide initial courses on Airless spraying and you can get an introduction before you purchase.
You can also get guidance on-site and test various Airless devices.
Exercises to enhance accuracy and decrease overspray
Exercises to enhance precision and lower overspray

Evaluate the material and find the best spray option
In addition, we offer a private and extensive consulting service in our training and testing.
Here we provide you the opportunity to check product with us and to discover the ideal spray technique and devices for this material and its function.
Our trainer (master painter with extra training in color and lacquer innovation) with numerous spraying devices is at your disposal.
Tips, tricks and more details about Airless spray painting innovation are also available in our YouTube channel and in our blog.

How To Paint A Wooden Fence

When my family and I moved into our new house a couple of years ago, we couldn’t be happier. The interior looked great, the rooms were amazing, and our large backyard had a beautifully made fence encasing it.

But as time went by, and the weather and mother nature began taking its toll, we noticed our fence started to look pretty dingy. This is nothing we didn’t expect, though, and I was ready to embark on a DIY paint project to restore our fence.

And I found that it wasn’t hard at all! All I needed was a couple of tools, a bit of elbow grease, and some free time.

In this article, I’ll be explaining the best way to paint a fence with detailed steps. By following these steps I was able to make our fence look brand new and completely revitalize the backyard. So read on to learn more.


How To Paint A Wooden Fence

How To Paint A Wooden Fence – The Fastest & Easiest Way

What Tools Do I Need?

You don’t need a lot when painting a wooden fence, in fact, I only needed four things, but I also found that having a couple of other items at your disposal helps a lot (but it isn’t exactly required).

What You’ll Need To Paint A Wood Fence:

  • Paint Sprayer
  • Your choice of paint
  • Extension cord
  • Mixing Bucket & Stir Stick (If needed)
  • Clear plastic sheet (optional)
  • Sandpaper (optional)
  • Paint Thinner (If needed)

Now that you have the tools, it’s time to look at things step by step.

The Steps To Painting A Fence

Step 1: Prep The Fence And Your Painting Area

Before you even start painting, you have to make sure both the fence and the area you’ll be painting in are ready. To start, you can begin cleaning the fence. This means giving it a good wipe down so that the paint will adhere to the surface. If you have sandpaper on hand, you can also give the surface a light sanding to really make the paint stick.

Once your fence is clean, you have to prepare the area where you’ll be painting. When using paint sprayers, it’s best to avoid getting paint where it isn’t needed. So make sure to put plastic sheets on the surrounding areas and vegetation, that way, cleanup will be easier as well.

If you have everything prepped and have the extension cord for your paint sprayer ready as well, you can start painting.

Step 2: Prepping The Paint And Paint Sprayer

Once your fence is ready to be painted, it’s time to take out your sprayer. Before anything, make sure to read the manual of your paint sprayer. This will let you know how to use it, set it up, and what paints can be used with it.

With most entry-level paint sprayers, you’ll have to thin your paints before spraying. So make sure you have your mixing bucket and stir stick to get your paint ready for spraying. Some sprayers come with a viscosity cup accessory that will help you determine if your paint is ready.

Step 3: Get To Painting!

This is the step that will require the most work. If you have a handheld paint sprayer, all you’ll have to do is load the paint reservoir with your paint, stand 8-12 inches away from your fence, and get to spraying.

This can be tricky, especially if you haven’t worked with sprayers before. The goal when spraying is to make sure you’re getting an even amount of paint over the surfaces. To do this right, first, you have to set the direction you want to be spraying. Most sprayers will give you horizontal and vertical options.

Once you’ve figured out the direction you’ll be spraying, try to take things a bit slowly. The best way to get a smooth finish with paint sprayers is by spraying thin and even coats. Thick coats might result in some paint running down the fence, giving you more work to do.

I found that two thin and even coats were enough to get the look I wanted on the fence. And once you get into a rhythm, the job will run quickly and smoothly. I’d be lying if I said I didn’t have a good time.

And that was about it for the painting part. But one nice thing to remember and keep in your head while doing this is that you shouldn’t leave your sprayer idle and loaded for more than 30 minutes. This can result in some paint drying up inside the reservoir and clogging everything up.

I learned this the hard way when I decided to take too long of a break between coats. If that happens to you, all you have to do is take off the nozzle and clean it. Your sprayer will work like a charm after that.

Step 4: Clean Up!

This is the last step in your paint project. No DIY job is done until you have cleaned everything up. Start by cleaning out the sprayer. All you have to do is take everything apart and follow the proper directions to do that.

Once that is done, all you have to do is clean out the paint. If you used water-based paint, simply load the sprayer with warm soapy water and wash out the paint. If you decided to use oil-based paint, all you have to do is load the sprayer with the right mineral spirits and do the same. Once that is done, simply wait for everything to dry and put the sprayer back together.

After cleaning out the sprayer, you have to clean up the area where you painted to fully finish the job. If you had plastic sheets to protect your yard, then simply take them out and store them until you need to paint again.

And that’s about all you’ll need to know about painting a wooden fence. It’s really simple and easy, and it can also save you some of the trouble and the cost of hiring a team to do the job for you.

The job is especially easy if you have a paint sprayer, which is why I would highly recommend getting one. But if you already have one and all your materials are ready, then all that’s left to do is to get spraying!